Filter
Top Products
2-7
4040 Finisher
Symptom Table
Testing the Finisher
To run paper through the finisher from the printer:
1. Select MENUS.
2. Select PAPER MENU.
3. Scroll until you have the option you want and be sure it is on and
saved.
4. Return to Ready.
5. Select MORE.
6. Select TEST MENU.
7. Select Print Fonts, or Print Test Page.
8. Do not use Continuous for staple or offset because there is no
end of job.
9. Be sure to reset the customer settings when you have com-
pleted the repair.
Symptom Action
Dead finisher. “Finisher Output Option
Missing” displays on the printer operator
panel when you enter the paper menu
selection.
Check the power cords and
interface cables. Go to the
“Power Service Check” on page
2-14.
Paper fails to enter finisher and the
paper feed motor does not run.
Go to the “Paper Feed Motor
ServiceCheck”onpage2-12.
The paper feed motor runs but the paper
fails to complete reversing or face down
delivery.
Go to the “Reversing Roller
ServiceCheck”onpage2-15.
Paper fails to exit swing guide or stapler
tray.
Go to the “Paper Delivery
ServiceCheck”onpage2-11.