Filter
Top Products
2-13
4040 Finisher
Paper Jam, 42, Reversing Paper Sensor Service Check
Clear all paper from the paper deck, printer, and finisher. If there is
no paper you must open and close one of the finisher covers to clear
the error.
Paper Jam, 43, Delivery Paper Sensor Service Check
Clear all paper from the paper deck, printer, and finisher. If there is
no paper you must open and close one of the finisher covers to clear
the error.
Paper Jam, 44, Staple Tray Paper Sensor Service Check
Clear all paper from the paper deck, printer, and finisher. If there is
no paper you must open and close one of the finisher covers to clear
the error.
1 Reversing
Paper Sensor
Flag (4-27)
Open the right access door and check the
operation of the flag (PN 11D0121) for the
reversing paper sensor (PI-2).
2 Reversing
Paper Sensor,
PI-2, (3-10)
Check the voltage of J12-3 on the finisher driver
board. There should be 5 V when the sensor is
activated (PN 11D0071).
3FinisherDriver
Board (13-1)
If there is still a problem, replace the finisher driver
board (PN 11D0294).
1 Paper Delivery
Sensor Flag
(5-15)
Check the flag for the delivery sensor (PI-3) by
opening the top cover and rasing the upper paper
guide (label 1). Replace the flag if necessary.
2 Paper Delivery
Sensor, PI-3
(5-13)
Check the voltage of J9-11 on the finisher driver
board. There should be 0 V when the sensor is
activated (PN 11D0151).
3FinisherDriver
Board (13-1)
If there is still a problem, replace the finisher driver
board (PN 11D0294).
1 Staple Tray
Paper Sensor
Lever (6-24)
Check the delivery paper sensor lever by rasing the
swing guide up and sliding a sheet of paper over
the sensor lever. Replace the lever if necessary
(PN 11D0187).