Filter
Top Products
2-4 Service Manual
4098-001
Power-On Self Test (POST) Sequence
Turn the printer on and check for a correct POST operation by
observing the following:
1. The power light come on.
2. The carrier moves to the left to wipe the printheads.
3. The carrier moves to the right over the maintenance station and
seals the printheads.
4. The paper feed gears turn.
5. All motors stop and the power light stays on.
If your printer completes POST with no errors, go to the “Symptom
Tables” on page 2-6, locate the symptom and take the indicated
action.
If your printer does not complete POST, locate the symptom in the
“POST Symptom Table” on page 2-5 and take the indicated
action.