port settings
configuring 61
PostScript menu 235
power cord socket 52
preparing to set up the printer on
an Ethernet network 56
print irregularities 341
print job
canceling, from computer 106
print quality
cleaning the scanner glass 252
print quality troubleshooting
blank pages 339
characters have jagged edges 334
clipped pages or images 334
compressed images appear on
prints 335
gray background on prints 336
horizontal voids appear on
prints 337
print irregularities 341
print is too dark 342
print is too light 344
printer is printing solid black
pages 340
repeating defects appear on
prints 345
shadow images appear on
prints 346
skewed print 346
streaked horizontal lines appear
on prints 347
streaked vertical lines 348
toner fog or background shading
appears on prints 349
toner rubs off 350
toner specks appear on prints 350
transparency print quality is
poor 351
uneven print density 351
white streaks 351
print troubleshooting
envelope seals when printing 327
error reading flash drive 327
held jobs do not print 326
incorrect characters print 328
incorrect margins on prints 338
jammed pages are not
reprinted 325
job prints from wrong tray 328
job prints on wrong paper 328
jobs do not print 330
Large jobs do not collate 329
multiple‑language PDF files do not
print 329
paper curl 339
paper frequently jams 325
print job takes longer than
expected 332
tray linking does not work 333
unexpected page breaks
occur 333
printer
basic model 13
finishing features 97
fully configured 13
minimum clearances 11
moving 11, 267, 268
selecting a location 11
shipping 268
printer configurations 13
printer control panel 16
factory defaults, restoring 271
indicator light 16
Sleep button light 16
Printer had to restart. Last job may
be incomplete. 311
printer hard disk
disposing of 247
encrypting 249
installing 42
removing 47
wiping 248
printer hard disk encryption 249
printer hard disk memory
erasing 248
printer information
where to find 10
printer IP address
finding 21
printer is printing blank pages 339
printer messages
[x]‑ page jam, open upper rear
door. [202] 281
[x]‑page jam, clear manual feeder.
[250] 290
[x]‑page jam, lift front cover to
remove cartridge. [200–
201] 277
[x]‑page jam, open automatic
feeder top cover. [28y.xx] 294
[x]‑page jam, open mailbox rear
door. Leave paper in bin.
[4yy.xx] 291
[x]‑page jam, open tray [x].
[24x] 289
[x]‑page jam, open upper and
lower rear door. [231–234] 283
[x]‑page jam, remove paper, open
stapler door. Leave paper in bin.
[4yy.xx] 295
[x]‑page jam, remove paper, open
stapler door. Leave paper in bin.
[455–457] 296
[x]‑page jam, remove standard bin
jam. [203] 287
[x]‑page jam, remove tray 1 to
clear duplex. [235–239] 288
Cartridge low [88.xy] 300
Cartridge nearly low [88.xy] 300
Cartridge very low, [x] estimated
pages remain [88.xy] 300
Change [paper source] to [custom
string] load [orientation] 300
Change [paper source] to [custom
type name] load
[orientation] 300
Change [paper source] to [paper
size] load [orientation] 300
Change [paper source] to [paper
type] [paper size] load
[orientation] 301
Check tray [x] connection 301
Close door or insert cartridge 301
Close finisher side door 301
Close flatbed cover and load
originals if restarting job
[2yy.xx] 301
Close front door 302
Close top access cover 302
Complex page, some data may not
have printed [39] 302
Configuration change, some held
jobs were not restored [57] 302
Defective flash detected [51] 302
Disk full 62 302
Disk full, scan job canceled 303
Disk must be formatted for use in
this device 303
Disk near full. Securely clearing
disk space. 303
Empty the hole punch box 303
Error reading USB drive. Remove
USB. 303
Error reading USB hub. Remove
hub. 303
Index 391