Filter
Top Products
16
Setup
Windows 98/Me/2000
a From the Start menu, click Settings Printers.
b Right-click the icon for your network printer.
c Make sure Set as Default is selected and Use Printer
Offline is not selected, and then click Properties.
d Click the Details or Ports tab.
e From the Print to the following port: menu, select the
printer port that consists of the printer name followed
by the last six characters of the printer adapter MAC
address (for example, Lexmark_Z65_1008e8).
f Click OK.
Windows XP
a From the Start menu, click Control Panel Printers
and Other Hardware Printers and Faxes.
b Click the Ports tab.
c From the list of ports, select the one that consists of
the printer name followed by the last six characters of
the printer adapter MAC address (for example,
Lexmark_Z65_1008e8).
d Click Apply.
e Click OK.
Verify that an IP address is listed for your network
printer.
Note: If there is not an IP address listed or your
network printer is <Unconfigured>, see
“Manually configure the network printer”
on page 34, and then continue with
step .
Click Close.
From the Networking Options screen, click Cancel.
Exit the Lexmark Solution Center.
6
7
7
8
9
Select the network printer port.
10