Filter
Top Products
20
Setup
Laser 2 (software previously installed)
Follow the instructions for your operating system.
Windows 98/Me, Windows NT 4.0, and Windows 2000
You are finished setting up your computer to work with your
network laser printer; however, the printer port must be
defined and the printer software must be installed on each
computer that uses the network printer.
Setting up other computers on your network
From the Start menu, click Settings Printers.
Right-click the icon for your network printer.
Make sure Set as Default is selected and Use Printer
Offline is not selected, and then click Properties.
Click the Details or Port tab.
From the Print to the following port: menu, select the
printer port that consists of the printer name followed
by the last six characters of the printer adapter MAC
address (for example, Lexmark_E320_0035D0).
Note: If there is not a printer port that
corresponds to the printer adapter MAC
address, see “Manually configure the
network printer” on page 34.
Click OK.
1
2
3
4
5
6
Insert the Lexmark Printer Adapter Installation
Software CD.
When the software installation screen appears, click
Install Now.
Click Next on the InstallShield Wizard screen.
1
2
3