Filter
Top Products
22
Setup
Windows XP
You are finished setting up your computer to work with your
network laser printer; however, the printer port must be
defined and the printer software must be installed on each
computer that uses the network printer.
Setting up other computers on your network
From the Start menu, click Control Panel Printers
and Other Hardware View installed printers or fax
printers.
Right-click the icon for your network printer.
Make sure Use Printer Offline is not selected, and
then click Properties.
From the Ports tab, select the printer port that
consists of the printer name followed by the last six
characters of the printer adapter MAC address (for
example, Lexmark_E320_0035D0).
Note: If there is not a printer port that
corresponds to the printer adapter MAC
address, see “Manually configure the
network printer” on page 34.
Click OK.
1
2
3
4
5
Insert the Lexmark Printer Adapter Installation
Software CD.
When the software installation screen appears, click
Install Now.
Click Next on the InstallShield Wizard screen.
1
2
3