Filter
Top Products
Diagnostic Aids 3-3
4044-XXX
User Mode Print Test
The User Mode Print Test Page displays the user default values,
installed options, printer features, various typefaces, and the
installed printer base code level.
1. Turn the printer power on. The Ready LED comes on solid
(printer is in the ready state).
2. Press and release the operator panel button.
3. The Ready LED comes on solid and the Data LED blinks indi-
cating the printer is busy.
4. The test page prints and the operator panel Ready LED comes
on solid and the Data LED turns off.
5. The printer returns to the Ready mode.
Configuration Mode
The configuration mode gives the ability to set the following printer
functions through the operator panel:
Parallel Port Settings
Enable Port
NPA Mode
Protocol
Mode 1
Mode 2
Strobe Adjust
USB Settings
Enable Port
NPA Mode
PPDS Activated
Auto CRLF/LFCR