Filter
Top Products
Diagnostic Aids 3-5
4044-XXX
the solid Ready LED. The setting of the menu item is indicated by
the status of the Press Button LED. To change the menu item
setting, briefly press the operator panel button. Once the setting you
want is indicated by the status of the Press Button LED, perform a
long button press to save the setting. All LEDs come on while the
setting is saved. To select other menu items, double-click the
operator panel button until the menu item LED you want is selected.
There are ten menu items that can be selected by using the five
LEDs as indicated by the following overlays on two passes through
the configuration menu. The first time through the menu the LED
selected is on solid. The second time through the menu the LED
selected is blinking.
First pass - LED on solid overlay.
Second pass - LED blinking overlay
Parallel Port
Parallel NPA
Parallel Protocol
CRLF/LFCR
PPDS
Off/On/Auto
Operator Panel Button
Parallel Mode 1
Parallel Mode 2
Parallel Strobe
USB NPA
USB Port
Off/On/Auto
Operator Panel Button