Lexmark MS312dn Laser Printer Printer User Manual


 
printer control panel
adjusting brightness 71
buttons 27
factory defaults, restoring 64
indicator light 27, 31
Sleep button light 31
using 27
printer control panel PIN
creating 64
printer control panel, virtual
display
using the Embedded Web
Server 67
Printer had to restart. Last job may
be incomplete. 165
printer information
where to find 9
printer is printing blank pages 193
printer messages
[x]page jam, clear manual feeder.
[25y.xx] 146
[x]page jam, clear standard bin.
[20y.xx] 143
[x]page jam, open front door.
[20y.xx] 139
[x]page jam, open rear door.
[20y.xx] 142
[x]page jam, open tray [x].
[24y.xx] 145
Bin full. Remove paper. 156
Cannot collate large document
[37] 156
Cannot defrag flash memory
[37] 156
Cartridge low [88.xy] 168
Cartridge nearly low [88.xy] 168
Cartridge very low, [x] estimated
pages remain [88.xy] 168
Cartridge, imaging unit mismatch
[41.xy] 168
Change [paper source] to [custom
string] load [orientation] 161
Change [paper source] to [custom
string]. Load [orientation]. 156
Change [paper source] to [custom
type name] load
[orientation] 161
Change [paper source] to [custom
type name]. Load
[orientation]. 157
Change [paper source] to [paper
size] load [orientation] 162
Change [paper source] to [paper
size]. Load [orientation]. 157
Change [paper source] to [paper
type] [paper size] load
[orientation] 162
Change [paper source] to [paper
type] [paper size]. Load
[orientation]. 157
Close front door 168
Complex page may misprint
[39] 157
Complex page, some data may not
have printed [39] 162
Configuration change, some held
jobs were not restored [57] 162
Credentials invalid. Print job
canceled. 168
Defective flash detected [51] 162
Defective flash memory [51] 157
Flash memory full [52] 158
Flash memory unformatted
[53] 158
Imaging unit low [84.xy] 169
Imaging unit nearly low
[84.xy] 169
Imaging unit very low, [x]
estimated pages remain
[84.xy] 169
Incorrect paper size, open [paper
source] [34] 163
Insert tray [x] 169
Insufficient memory for Flash
Memory Defragment operation
[37] 163
Insufficient memory to collate job
[37] 163
Insufficient memory to support
Resource Save feature [35] 163
Insufficient memory, some Held
Jobs were deleted [37] 163
Insufficient memory, some held
jobs will not be restored
[37] 164
Jam, front door [20y.xx] 130
Jam, MP feeder [250.xx] 137
Jam, rear door [20y.xx] 133
Jam, standard bin [20y.xx] 134
Jam, tray [x] [24y.xx] 136
Load [paper source] with [custom
string] [orientation] 169
Load [paper source] with [custom
type name] [orientation] 169
Load [paper source] with [paper
size] [orientation] 170
Load [paper source] with [paper
type] [paper size]
[orientation] 170
Load Manual Feeder with [custom
string] [orientation] 164
Load Manual Feeder with [custom
type name] [orientation] 164
Load Manual Feeder with [paper
size] [orientation] 164
Load Manual Feeder with [paper
type] [paper size]
[orientation] 164
Load MP feeder with [custom
string] [orientation] 158
Load MP feeder with [custom type
name] [orientation] 158
Load MP feeder with [paper size]
[orientation] 159
Load MP feeder with [paper type]
[paper size] [orientation] 159
Memory full [38] 170
Memory low, no Resource Save
[35] 159
Network [x] software error
[54] 165
Network error, port [x] [54] 160
Network error, standard port
[54] 160
NonLexmark [supply type], see
User’s Guide [33.xy] 159, 165
Not enough free space in flash
memory for resources [52] 165
Paper too short [34] 160
Parallel port disabled [56] 160
Print quota exceeded. Print job
canceled. 170
Print quota exceeded. Print job
incomplete. 170
Printer had to restart. Last job
may be incomplete. 165
Printer restart. Check last job. 161
Rear USB port disabled [56] 161
Reinstall missing or unresponsive
cartridge [31.xy] 170
Reinstall missing or unresponsive
imaging unit [31.xy] 171
Remove paper from standard
output bin 166
Replace cartridge, 0 estimated
pages remain [88.xy] 171
Index 222