Lexmark MS410D Printer User Manual


 
Universal Setup menu
Use To
Units of Measure
Inches
Millimeters
Identify the units of measure.
Notes:
Inches is the US factory default setting.
Millimeters is the international factory default setting.
Portrait Width
3–8.5 inches
76–216 mm
Set the portrait width.
Notes:
If the width exceeds the maximum, then the printer uses the
maximum width allowed.
8.5 inches is the US factory default setting. You can increase the
width in 0.01inch increments.
216 mm is the international factory default setting. You can increase
the width in 1mm increments.
Portrait Height
3–14.17 inches
76–360 mm
Set the portrait height.
Notes:
If the height exceeds the maximum, then the printer uses the
maximum height allowed.
14 inches is the US factory default setting. You can increase the
height in 0.01inch increments.
356 mm is the international factory default setting. You can increase
the height in 1mm increments.
Feed Direction
Short Edge
Long Edge
Specify the feed direction if the paper can be loaded in either direction.
Notes:
Short Edge is the factory default setting.
Long Edge appears only when the longest edge is shorter than the
maximum width supported in the tray.
Reports menu
Reports menu
Use To
Menu Settings Page Print a report containing information about the paper loaded in trays, installed
memory, total page count, alarms, timeouts, printer control panel language,
TCP/IP address, status of supplies, status of the network connection, and other
information.
Device Statistics Print a report containing printer statistics, such as supply information and details
about printed pages.
Understanding the printer menus 64