Lexmark MS410D Printer User Manual


 
What are you looking for? Find it here
The latest supplemental information, updates, and customer
support:
Documentation
Driver downloads
Live chat support
Email support
Voice support
Lexmark Support Web site—
http://support.lexmark.com
Note: Select your country or region, and then select
your product to view the appropriate support site.
Support telephone numbers and hours of operation for
your country or region can be found on the Support Web
site or on the printed warranty that came with your
printer.
Record the following information (located on the store
receipt and at the back of the printer), and have it ready
when you contact customer support so that they may
serve you faster:
Machine Type number
Serial number
Date purchased
Store where purchased
Warranty information Warranty information varies by country or region:
In the US—See the Statement of Limited Warranty
included with this printer, or at
http://support.lexmark.com.
In other countries and regions—See the printed
warranty that came with your printer.
Selecting a location for the printer
When selecting a location for the printer, leave enough room to open trays, covers, and doors. If you plan to install any
hardware options, then leave enough room for them also. It is important to:
Set up the printer near a properly grounded and easily accessible electrical outlet.
Make sure airflow in the room meets the latest revision of the ASHRAE 62 standard or the CEN Technical Committee
156 standard.
Provide a flat, sturdy, and stable surface.
Keep the printer:
Clean, dry, and free of dust.
Away from stray staples and paper clips.
Away from the direct airflow of air conditioners, heaters, or ventilators.
Free from direct sunlight and humidity extremes.
Observe the recommended temperatures and avoid fluctuations.
Ambient temperature 16 to 32°C (60 to 90°F)
Storage temperature 20 to 40°C (4 to 104°F)
Allow the following recommended amount of space around the printer for proper ventilation:
Learning about the printer 8