Lexmark MS410D Printer User Manual


 
Avoid paper jams
Correctly set the paper type and size to avoid paper jams. For more information, see “Avoiding jams” on page 105.
Saving energy
Using EcoMode
Use EcoMode to quickly select one or more ways to reduce your printer's environmental impact.
1 From the printer control panel, navigate to:
> Settings > > General Settings > > EcoMode > > select the setting you want
Use To
Off Use the factory default settings for all settings associated with EcoMode. This setting supports the
performance specifications for your printer.
Energy Reduce energy use, especially when the printer is idle.
Printer engine motors do not start until a document is ready to print. You may notice a short delay
before the first page is printed.
The printer enters Sleep mode after one minute of inactivity.
Energy/Paper Use all the settings associated with Energy and Paper modes.
Paper
Enable the automatic twosided (duplex) printing feature.
Turn off print log features.
2 Press .
Using Hibernate mode
Hibernate is an ultralowpower operating mode. When operating in Hibernate mode, all other systems and devices
are powered down safely.
Note: Hibernate mode can be scheduled. For more information, see “Using Schedule Power Modes” on page 88.
Using the Embedded Web Server
1
Open a Web browser, and then type the printer IP address in the address field.
Notes:
View the printer IP address in the TCP/IP section in the Network/Ports menu. The IP address appears as four
sets of numbers separated by periods, such as 123.123.123.123.
If your are using a proxy server, then temporarily disable it to load the Web page correctly.
2 Click Settings > General Settings > Sleep Button Settings.
Saving money and the environment 86