Filter
Top Products
Use To
Mirror Image
Off
On
Create a mirror image of the original document.
Note: Off is the factory default setting.
Negative Image
Off
On
Create a negative image of the original document.
Note: Off is the factory default setting.
Shadow Detail
‑4 to 4
Adjust the amount of shadow detail visible.
Note: 0 is the factory default setting.
ADF Skew Fix
Auto
Off
On
Correct the slight skew in the scanned image.
Note: Auto is the factory default setting.
ADF Multi-feed Sensor
On
Off
Allow the scanner to detect when the ADF picks more than one sheet of paper at once.
Note: On is the factory default setting.
Scan edge to edge
Off
On
Specify if the original document is scanned edge-to‑edge prior to faxing.
Note: Off is the factory default setting.
Sharpness
1–5
Adjust the sharpness of a fax.
Note: 3 is the factory default setting.
Temperature
‑4 to 4
Specify “warm” or “cool” outputs. “Cool” values generate a bluer output than the
default while “warm” values generate a redder output than the default.
Note: 0 is the factory default setting.
Use To
Enable Fax Receive
On
Off
Allow the printer to receive fax jobs.
Note: On is the factory default setting.
Fax Job Waiting
None
Toner
Toner and Supplies
Remove fax jobs from the print queue when the job requires specific unavailable
resources.
Note: None is the factory default setting.
Rings to Answer
1–25
Specify the number of rings before answering an incoming fax job.
Note: 3 is the factory default setting.
Auto Answer
Yes
No
Allow the scanner to answer an incoming fax job.
Note: Yes is the factory default setting.
Understanding the printer menus 199