Filter
Top Products
Scanning to a USB flash memory device
52
Scanning to a PC or USB flash memory device
Scanning to a USB flash memory device
1 Place the original document in the ADF face up or on the flatbed face down.
Adjust the paper guides when using the ADF.
2 Insert the USB flash memory device into the USB direct interface on the front of the MFP.
The Held Jobs screen appears.
3 Touch Scan to USB drive.
4 Enter the name of the file.
5 Select your scan settings.
6 Touch Scan It.
Scanning tips
The following tips may improve the MFP scanning quality. For additional information, see Solving scan quality problems.
Question Tip
When should I use Text mode? • Text mode should be used when text preservation is the main goal of the scan, and
preserving images copied from the original document is not a concern.
• Text is best used for receipts, carbon copy forms, and documents that only contain
text or fine line art.
When should I use
Text/Photo mode?
• Text/Photo mode should be used when scanning an original document that
contains a mixture of text and graphics.
• Text/Photo is best used for magazine articles, business graphics, and brochures.
When should I use Photo mode? Photo mode should be used when scanning photos printed on a laser printer or taken
from a magazine or newspaper.