Filter
Top Products
27
ENG
English
Using CLOUD Solution
USING CLOUD SOLUTION
If the network is not properly connected (e.g., dur-
ing portal boot up), or connection is being created,
the "Network connection lost. Waiting for connec-
tion …" message is displayed on the Connection
screen.
Figure 2-2 shows the message displayed when the
network is not ready.
If the network is connected and IP is being ac-
quired, the message "Network connection detect-
ed. Acquiring IP address …" is displayed on the
Connection screen. Figure 2-3 shows the message
displayed when the network is ready and the IP is
being acquired.
<Figure 2-1: OSD Connect Screen>
<Figure 2-2: Network Not Ready>
<Figure 2-3 Acquiring the IP after Network Con-
nected>
The below is the Connection screen displayed
when network is completely ready.
<Figure 2-4: Network Ready>
Connect Screen
The Connect screen is shown during start-up,
except when the portal has been configured for a
managed start-up or auto-reconnect. The logo dis-
played above the Connect button can be changed
by uploading a replacement image via the admin
interface.
y
Menus and functions in CLOUD mode may
be slightly different depending on the firmware
version. You can download the user manual
for each version from the Teradici homepage:
http://www.teradici.com
y
To check the firmware version, see page <?>.
NOTE