Filter
Top Products
38
ENG
English
Using CLOUD Solution
y
Port
For the default setting, leave the port field
empty. When the VMware View Connection
Server uses the SSL authentication, enter 443
in the Port field.
If the server where a user tries to access uses
a port other than a general port, enter the port.
y
Use OSD logo for View banner
If this option is enabled, you can change the
OSD logo of PCoIP during the login.
y
Enable Peer Loss Overlay
If this option is selected, the "Network Con-
nection Lost" message is displayed on the
screen when it is confirmed that the network is
disconnected.
The display is the same as in the VDI environ-
ment. The default is Disable.
<Figure 2-21: Advanced Setting for View Connec-
tion Server + Kiosk>
<Figure 2-22: View Connection Server + Imprivata
OneSign Connection Setting>
y
The OSD logo can be uploaded using the
Webpage Administration Interface.
NOTE
y
Bootstrap URL
Enter the IP address or FQDN information of
the server which performs the OneSign au-
thentication.
y
This setting is provided only for the client.
NOTE
y
Enable Preparing Desktop Overlay
If this option is selected, the "Preparing Desk-
top" message is displayed on the screen when
the user is logged in.
y
Disconnect Message Filter
This option determines the type of message to
display when a session is disconnected.
- Show All: Shows all the error messages.
- Show Error and Warning Only: Shows the
error and warning messages only.
- Show Error Only: Shows the error messages
only.
- Show None: Shows nothing.
y
View Connection Server + Imprivata OneSign
Connection
Select View Connection Server + Imprivata
Onesign Connection to use the Imprivata One-
sign Connection for the client authentication.