Filter
Top Products
Liebert STS2 Touch Screen Display
94
13.8.1 Configuring the Modem
The Modem dialog box allows you to configure the optional external modem that is connected to the
Liebert STS2.
The dialog box contains a series of choices that access either a keypad or a secondary dialog to
configure settings. Auto dial can also be configured for the modem to be triggered by events, as set up
in the Event Mask choices.
Designated major alarms activate the auto dial modem sequence. Automatic dial attempts are made
to the first number three times, at 30 seconds between attempts. If connection is not established in
that time period, the system automatically rolls over to the second number. Auto dial attempts are
made again three more times at 30 seconds between attempts. The process is repeated until a
successful connection is made. Upon successful connection, the system transmits a present status
data, including all active alarms messages. After transmission, the modem automatically hangs up
and returns to the auto-answer mode.
To configure the modem:
1. Select MODEM from the Comm Options menu.
The Modem dialog box is displayed.
Figure 56 Modem dialog box
2. Select the type of modem that the Liebert STS2 will be using:
• Select INT internal modem not available.
• Select EXT if the Liebert STS2 will be communicating via an external modem.
3. Select the PRIMARY LINE choice to enter the primary telephone number for the modem to dial
when an alarm is triggered.
4. Enter the number in the keypad dialog box.
5. Select OK to save the telephone number. The number is displayed in the field adjacent to the
Primary Line choice.
6. Select the SECONDARY LINE choice to enter the secondary telephone number for the modem to
dial when an alarm is triggered.
7. Enter the number in the keypad dialog box.
8. Select OK to save the telephone number. The number is displayed in the field adjacent to the
Secondary Line choice.