Filter
Top Products
36 Chapter 1 Product Introduction
E1-20010230-C-1.0
B) After entering " function setup " menu , function information which can be setup can
be viewed and set by pressing the scroll key ; when the screen displays " Return to
main menu", press enter key to return the main menu of " operating parameters ".
C) After entering " function setup" menu , the parameters whose value is to be
modified are displayed in reverse contrast text mode and the parameters' values can
be changed by pressing the scroll key ; save the parameters which have already been
modified by pressing the enter key and the parameters' value will be stored and the
value display will switch from reverse contrast to normal text mode.
Note
When the equipment's address is changed, the charging between 3-bit digits are
done through auto shifting when no key is pressed for 3 seconds.
D) When it is in alarm state, alarm information can be viewed by pressing the scroll
key
；
When the screen displays "Return to main menu" , press the enter key to return
"operating parameters" main menu.
4. Information LCD-displaying Priority
1. LCD will display present alarm information of the highest priority if no key is pressed
in 30 second.
2. LCD-displaying information will not be changed when there is no alarm, the LCD will
display level 2 sub menu such as "Output current" when no key is pressed. On the
contrary, if the LCD isn't displaying the level 2 sub menu information and no key is
pressed in 30 second, it will return to the state to display " Output voltage: xxx ".