Filter
Top Products
48 Operation
3.1.5 System Configuration Screens
Go to the Master Menu and move the highlighted cursor to SYSTEM CONFIGURATION. Press the Select pad
and the System Configuration screen is displayed.
The System Configuration screen lists parameters that can be changed to adjust the “personality” of your UPS
modules and the SCC to your site requirements. Some of the information displayed is factory set and should only
be changed by Liebert Global Services. Parameters that should be adjusted by the user include date, time, auto
dial number, and modem baud rate.
The System Configuration screen is one of the displays that has controlled access to limit who is able to change
site parameters. This type of screen is called a Security Access screen. This controlled access feature allows any-
one to review the present parameters, but limits access for making changes. When you see Security Access dis-
played on the screen (upper left corner), to make authorized c h anges you must open the control cabinet door (key
required) and push the Interlock button on the back of the control panel (Figure 11). Close and lock the control
cabinet door after making authorized changes.
Figure 29 SCC System Configuration Screen
Part Number. This is a factory set part number of the UPS cabinet which determines many i nternal operating
parameters. It cannot be changed.
Order Number. This is a factory set number to i dentify your particular installation.
System Number. This number is used to identify one or more UPS systems that may be present on one site.
Number of Modules in System. This shows the total number of modules.
NOTE
If you accidentally set a site parameter digit to a wrong value, you must return to the
System Configuration screen and go again t o your desire d screen.
SYSTEM CONFIGURATION
EXIT
SECURITYACCESS
02-791112-14
000000
00000
0000000
1
2
01/17/96
14:51:59
YES
5
1600
PartNumber .......................................
OrderNumber ....................................
SiteIDNumber ..................................
SiteTAGNumber ..............................
System Number .................................
Numberof Modules inSystem ..........
Date ...................................................
Time ...................................................
AutoDial ............................................
MaxAuto-RexferAttempts ................
System CurrentRating ......................
System Options
CURSORUP
CURSORDOWN
CHOOSE
UP :
DOWN :
SELECT :
DISCONTINUED
PRODUCT