Filter
Top Products
Touch Screen Display
105
Comm Options
The Comm Options dialog box allows you to configure the communications settings for the STS2/
PDU.
• Select COMM OPTIONS from the System Settings Menu.
• The Comm Options dialog box is displayed. See Figure 70.
• An option can be enabled by selecting YES.
• An option can be disabled by selecting NO.
• An option can be configured by selecting the adjacent option button to display a separate configu-
ration dialog box.
The instructions for configuring the communications options are provided in this section.
Figure 70 Comm options dialog box
Configuring the Modem
The Modem dialog box allows you to configure the optional, internal modem or an external modem
that is connected to the Static Transfer Switch 2 Power Distribution Unit. Only one modem can be
utilized by the STS2/PDU.
The dialog box contains a series of choices that access either a keypad or a secondary dialog to config-
ure settings. Auto dial can also be configured for the modem to be triggered by events, as set up in the
Event Mask choices.
Designated major alarms activate the auto dial modem sequence. Automatic dial attempts are made
to the first number three times, at 30 seconds between attempts. If connection is not established in
that time period, the system automatically rolls over to the second number. Auto dial attempts are
made again three more times at 30 seconds between attempts. The process is repeated until a success-
ful connection is made. Upon successful connection, the system transmits a present status data,
including all active alarms messages. After transmission, the modem automatically hangs up and
returns to the auto-answer mode.
Option
buttons