Filter
Top Products
Lightwave Communications USB SERVERSWITCH
Page 12 of 25 December 2001
3.2 System Setup
Selecting the 'USBSS System Setup' line and pressing Enter will go into Set Up:
USBss System Setup
Version: 1.34
Auto scan duration: 10 sec
Error Message duration: 5 sec
ignore Case in names
Server Name is Temporary
Port setup...
menu Window setup...
Server window setup...
Selecting “Port setup,” “menu Window setup,” or “Server window setup” will open
one of three sub-menus to be discussed in the following pages.
The options at the main System Setup window can be selected by highlighting the
desired option using the up/down arrows on your keyboard to select the option
and scrolling through the values of each using either the +/- keys OR the “Enter”
key to select your desired value.
• Auto Scan Duration - Select the length of time, between 2 to 30 seconds,
that each port will be scanned during auto scan.
• Error Message Duration - Select the amount of time (2 to 15 seconds)
each error message appears on the LCD as the system scans the ports.
• Ignore Case in Names/Case Sensitive Names - This option lets you
dictate whether the names entered in the “Jump to port...” mode need to
be case sensitive, or not.
• Server Name is Never On/Always On/Temporary - As you scroll
through each port and/or as each port goes through auto scan, you have
the option of having the Server Window with the connected port's
name/number appear permanently, temporarily, or not at all.
• Port Setup - discussed in a Section 3.3
• Menu Window Setup - discussed in a Section 3.2.2
• Server Window Setup - discussed in a Section 3.2.3
NOTE: System Setup options and values are automatically saved to the
memory of the USB ServerSwitch.