Lightwave Communications USB SuperSwitch Switch User Manual


 
Lightwave Communications USB SERVERSWITCH
Page 18 of 25 December 2001
5.0 Installation
The USB ServerSwitch unit is designed to occupy 1 RU (1.75 inches) of rack
space. Sufficient space is required behind the rear panel of the unit to allow for
attached cables bend radius (6 inches should be sufficient). It is helpful to plan
ahead if additional units might be added to the configuration at some later date. If
cascading (adding USB ServerSwitches) is to be used, make certain to leave
enough space in the rack for additional units. The USB ServerSwitch installation
can be expanded at any time, without interfering with servers connected to existing
switches.
Figure 5: USB ServerSwitch – Front and Rear panels
STEP 1 -- Unpacking the Items
Verify that the following items are located in the packaging.
(1) USB ServerSwitch
(1) AC Power Cordset
(1) Cable - DB9 Female to Male Serial data cable (6 foot long)
(1) USB ServerSwitch Product Handbook
Cables, as required for your number of servers and units
NOTE! Optional cable kits are available. (1) Kit contains:
(1) USB-A to USB-B cable, to connect a server's keyboard and mouse to
the USB ServerSwitch
(1) HD15 male-male video cable to connect server video adapter to the
USB ServerSwitch
Cascade kit includes two HD15 male-male cables. The DB9 male-to-
female cable required is shipped with the USB ServerSwitch
NOTE! Other items may be ordered or shipped separately.