Filter
Top Products
Lightwave Communications USB SERVERSWITCH
www.lightwavecom.com Page 15 of 25
3.2.3 System Setup: Server Window Setup
The Server Window contains the port name and number that the User is connected
to. The Server window is displayed briefly when connecting to a server.
Figure 4 Terminal showing sample Server Window display
Select the color and position of the Server Window by scrolling through the above
options using the up/down arrow keys and pressing “Enter” to move the window
and/or change colors. Use the color and position options listed in Section 3.2.2.
To select a specific function, press the hot-key letter that is capitalized /
highlighted.
3.3 Front-panel LCD Display
The USB ServerSwitch is equipped with a backlit LCD display. The display is used
in conjunction with the front panel UP and DOWN arrow buttons when selecting
Servers for either user. A 'normal' display is shown below.
A: Port 1 Name
When the USB ServerSwitch is turned on the LCD will show the version of the
switch, and perform internal system diagnostics. Within a minute of power-up, the
display shows which Server Port is connected to which Console (A or B) on the top
line, and also shows real-time error messages using the bottom line.
File Server 2 8