Filter
Top Products
2.8.1 Get/Refresh the Latest Mirror Settings
Click the Mirror menu on the web page. The mirror settings on the switch will be displayed. This is
also the page to configure the port mirroring function.
The following parameters are required to be set:
Mirroring Options – There are four options for each port:
¾ Disable Mirror – to disable mirror function.
¾ Mirror All Frames – to set the corresponsive port to be a monitored port to investigate
bi-directional traffic.
¾ Mirror Incoming Frames – to set the corresponsive port to be a monitored port to
investigate only ingress (receiving, Rx) traffic.
¾ Mirror Outgoing Frames – to set the corresponsive port to be a monitored port to
investigate only egress (forwarding, Tx) traffic.
Monitored Port – The port which is monitored.
Capture Port – All traffic mirrored from the monitored port are received on the capture port.
34