Filter
Top Products
2.11.1.1 Firmware Update Via TFTP
Before proceeding with the firmware update, it is required to correctly prepare the TFTP server and
the firmware file which will be uploaded to the switch. (Please refer to the vendor’s instruction
guide for setting up the TFTP server you would like to use).
When the TFTP server and the firmware file are ready, please enter the TFTP server IP address and
firmware filename. Click the Apply button to start the firmware update through the any front port on
the switch.
The time taken for processing the firmware update will be approximately 50 seconds.
NOTE: If the switch can not connect to the TFTP server, click the Cancel button to stop the
firmware update process.
48