Lindy CPU IP Access Switch Plus Switch User Manual


 
 




16
Part 2 – Remote conguration
The second part of the conguration requires you to log into the CPU IP from a
system via either a network connection or a dial-up connection (via modem or
ISDN). In either case there are two types of access applications that you can use:
• The VNC viewer – a small application supplied on the CD-ROM or
downloadable from the RealVNC website or even downloadable from the
CPU IP itself.
or
• A standard browser that supports Java – As soon as a web browser makes
contact, the CPU IP downloads a Java application to it. This allows a viewer
window to be opened and operation to commence just as it would with the
VNC viewer application.
To perform the remote conguration
1 Use either the VNC viewer or a standard web browser to make remote
contact with the CPU IP – see Connecting to the CPU IP’ for more details.
2 If the username entry is not blanked out, enter ‘admin’. Then enter the
password that was set during the local conguration stage (if no password
was set, then just press ). Once logged in, the CPU IP will show the video
output from the host system (if one is connected), or otherwise a ‘No Signal’
message.
3 Click the Congure button in the top right hand corner of the window to
display the conguration menu
ò
Many of the options within the conguration menu duplicate those
that were set (or are available) in the local conguration. However,
there are numerous other settings that are only available here.
User accounts
Allows you to create and manage up to sixteen separate user
accounts, each with separate access permissions.
Unit conguration
Allows you to alter both basic and fundamental
settings within the CPU IP.
Network conguration
Here you can alter any of the existing network settings plus
you can take advantage of the IP access control feature that
lets you to specically include or exclude certain addresses or
networks.
Serial port conguration
Lets you setup or alter the details concerning
the modem and power control serial ports.
Host conguration
Allows you to congure user access, hot key switching and
power control codes for up to 32 host systems that may be
connected to the CPU IP via KVM switch units.
Logging and status
Provides various details about the user
activity on the CPU IP.
For more information about each menu option, please see Appendix 5
- Remote conguration menus in the ‘Further information’ chapter.
Shaded items signify
options that are not
available at the local
conguration stage.