Linksys EA3500 Network Router User Manual


 
18
Setting Up: Basics
Linksys EA-Series
NOTE
Internet connection speeds are determined by a variety of factors,
including ISP account type, local and worldwide Internet traffic,
and number of devices in your home that are sharing the Internet
connection.
4.
Click Restart Test to run it again, and click Show History to display the
results of past tests.
How to connect devices to your network
Your Linksys router is the nerve center of your home network. Your router safely
opens the Internet to your network, and all of your computers and network
devices rely on your router to pass files, media, and network commands in an
organized, error-free way. Whether connected wirelessly or with cables, each
part of your network needs the router in order to work reliably with the other
parts of your network.
How to connect a computer to your network
To connect a computer to your network:
1.
At the computer you want to connect, enter your network’s connection
information into your wireless manager.
2.
After that computer connects to your network, log into Cisco Connect
Cloud, then click Device List to confirm that your router recognizes
the new computer. You can use the Device List to monitor all network-
attached devices.
How to connect a USB printer
When you install a printer that requires a cable, you can:
Follow the printer’s instructions for setting it up, then follow your
computer’s operating system instructions to share the printer with your
network.
- OR -
If your router is a Linksys EA3500, EA4500, or EA6500, you can connect a
USB printer to the router’s USB port to make the printer available to any
networked computer.
When you set up a wireless printer, you need to make sure that:
Your printer has been completely set up except for being connected to
the network.
Your printer supports the WPA/WPA2 wireless encryption standard.
If your wireless printer supports Wi-Fi Protected Setup, you should use
Wi-Fi Protected Setup to connect the printer to your network. See “How
to connect a network device using Wi-Fi Protected Setup” on page 19.
To connect a USB printer to your network through the router’s USB port:
For
EA3500 EA4500 EA6500
1.
Log into Cisco Connect Cloud. (See “How to configure your router” on
page 14.
2.
Click Device List, then click Add a Device.