Linksys EA3500 Network Router User Manual


 
35
Setting Up: Advanced
Linksys EA-Series
d.
Network mode—Your choice depends upon the clients that will
connect to your network. If all of your devices are Wireless-N capable,
you can select Wireless-N Only for either or both bands.
On the 2.4 GHz band, you can select:
Mixed
Wireless-B/G Only (not available on the EA6500)
Wireless-N Only
Wireless-G Only
Wireless-B only (not available on the EA6500)
On the 5 GHz band, you can select:
Mixed (default), which accepts connections from 802.11a or
802.11n clients
Wireless-N Only (802.11n only)
Wireless-A Only (802.11a only) (not available on the EA6500)
Wireless-AC Only (EA6500 only)
e.
Security mode—You can set up different security options for the
5GHz and 2.4GHz networks. If the security mode you select requires
a passphrase, a Passphrase field appears, and you must enter a
passphrase. You can select:
None (no security)
WEP
WPA Personal
WPA Enterprise
WPA2 Personal
WPA2 Enterprise
WPA2/WPA Mixed Personal
WPA2/WPA Mixed Enterprise
TIP
Wireless-N networks should use the WP2-Personal security
mode for best performance.
f.
Channel width—We recommend that you keep the default (Auto)
setting for each band. In Auto mode, the router and the network
clients automatically switch to the 40MHz mode if:
Your wireless clients support the 40 MHz mode (sometimes
called Bonded mode) in which two 20MHz channels are bonded
together for better performance.
There is no adjacent interference.
With more available channels and less chance of interference on the
5GHz band, you have the option to force the 40MHz mode.
On the 2.4GHz band, you can select:
Auto (20 MHz or 40 Mhz)
20 MHz Only
On the 5GHz band, you can select:
Auto (automatically selects from the options below)
20 MHz Only
40 MHz Only
80 MHz Only (EA6500 only)
g.
Channel—Choose the operating channel for each band. Your
router will automatically select the channel with the least amount
of interference if you leave the default Auto setting. We recommend
keeping the default settings for both bands.
h.
SSID broadcast—(not available on the EA6500) When wireless
clients look for wireless networks to connect to, they detect the SSID
(wireless network name) broadcast by the router. In other words,
anyone within range of your network can see your network name.
To broadcast your router’s SSID, keep the default setting (Enabled).
If you do not want to broadcast the router’s SSID, deselect the SSID
broadcast checkbox. We recommend keeping the default setting
(Enabled) for both bands.
4.
To save your changes, click OK.