Filter
Top Products
Installing a 4.x Server
The EtherFast Card network driver is installed during
the NetWare installation process. During the setup you
may want to refer to your NetWare 386 v4.0 installation
Manual for help. You will also be using ConfigDisk
during the setup.
At the NetWare prompt (indicated by the server name),
run the INSTALL.NLM program by typing load install.
1. Select Maintenance/Selective Install and press Enter.
2. Select LAN Driver Options and press Enter.
3. Press the Insert or Ins key on your keyboard to
insert a new driver. Put the EtherFast card’s program
disk 2 into drive A or B.
4. Press F3 and specify the driver path. If the EtherFast
Card disk is in drive A:, for example, type
a:\netware\server\4.x and press Enter. The program
will locate the EtherFast Card’s LNE100TX.LAN and
LNE100TX.LDI files on the disk.
5. The LNE100TX.LAN driver will appear as an option
in the Select a LAN Driver field. Choose this driver to
start the loading and binding procedure.
6. Add the LOAD and BIND statements to your server's
AUTOEXEC.NCF file so that the LAN driver loads
automatically each time your server is started up.
The load and binding are complete. The server is ready
to be used.
43
NetWare