Filter
Top Products
7
Chapter 3: Getting to Know the Wireless-G Game Adapter
The Game Adapter’s Side Panel
Wireless-G Game Adapter
The Game Adapter’s Side Panel
The Game Adapter’s mode switch, Reset button, and ports are located on the side panel of the Game Adapter.
Switch The switch is used to set the Game Adapter’s mode. The switch allows you to set the Game Adapter
to Ad-hoc or Infrastructure mode. If you will run the Setup Wizard or connect the Game Adapter
directly to your Xbox, then set the switch to the Infrastructure position. If you will follow the “Fast
Setup” instructions, then set the switch to the Adhoc position.
Reset The Reset button is used to reset the Game Adapter to its factory default settings. To restore the
factory defaults, press this button for approximately five seconds.
Network The Network port is where you will connect the Ethernet network cable to your computer for setup
or your game console for gaming.
Power The Power port is where you will connect the included power adapter.
Figure 3-2: Side Panel