3. Windows will now ask you where to search for the driver software. Select
Specify a location and type in the blank field D:\WAP11\WIN9X (where
“D” specifies your CD-ROM). Then, click the Next button.
4. Windows will now search for the driver. After Windows has acknowledged
finding the driver, click the Next button.
5. Windows will now install the driver files. Click the Finish button when com-
pleted.
6. Continue on to the Configuring the Wireless Network Access Point section
for software installation.
9
Installing the USB Drivers for
the Wireless Network Access
Point
1. Windows 98 will automatically identify the Wireless Network Access Point,
once it is connected to the PC, and prompt you to install the necessary driver.
Make sure that the Setup Utility CD is inserted into your CD-ROM drive and
click the Next button on the Add New Hardware Wizard screen to proceed.
(When you insert the Setup Utility CD, the installation may try to run auto-
matically. If it does, exit out of the program and return here.)
2. Select Search for the best driver... and click the Next button. This will
search for the Windows 98 driver.
8
Instant Wireless
TM
Series
Wireless Network Access Point
Installing the Driver Software for Windows 98
