Filter
Top Products
13
Chapter 5: Setting up the Wireless-G Access Point with SRX
Using the Setup Wizard
Wireless-G Access Point with SRX
9. The Basic Settings screen will appear next. Enter a descriptive name in the Device Name field. Create a
password that will control access to the Access Point’s Web-based Utility and Setup Wizard.
If your network router will automatically assign an IP address to the Access Point, then select Automatic-
DHCP.
If you want to assign a static or fixed IP address to the Access Point, then select Static IP. Enter the IP
Address, Subnet Mask, and Default Gateway settings. If you are not sure what changes you should make, then
keep the default values.
Then, click the Next button to continue or Back to return to the previous page.
Device Name - Enter a descriptive name for the Access Point.
Password - Enter a password that will control access to the Utility and Setup Wizard.
IP Address - This IP address must be unique to your network. (The default IP address is 192.168.1.245.)
Subnet Mask - The Access Point's Subnet Mask must be the same as the subnet mask of your Ethernet
network.
Default Gateway - Enter the IP address of your network gateway (usually your router).
Click the Next button to continue or the Back button to return to the previous screen.
Figure 5-8: Basic Settings Screen