Filter
Top Products
LSI22902/22903 Host Adapter to Intel ISP1100 Internet Server 7
Step 1. Attach the hard drive LED cable to the SCSI host adapter card.
Use either pin pairs 1-2 or 3-4, as shown in the inset in
Figure 6.
Step 2. With the host adapter board bracket facing the rear of the
computer, insert the host adapter card in the expansion slot by
carefully pressing the PCI bus edge connector into the PCI slot.
TheSCSIcardalignsitselfproperlytothePCIslotifthecard
guide bracket is in the proper position.
With the card properly inserted, the SCSI card bracket rests in
the tab on the back of the chassis. There is no screw securing
the card guide bracket in place as in a PC.
Step 3. Secure the expansion bay retention clip with the two previously
removed screws.
Figure 6 Method 1 Installation