Filter
Top Products
Log Messages
Message descriptions
SP Switch Router Adapter Guide - 1.4 Update 2 October 22, 1999 B-13
- Off-line-Q = 4
- Running = 5
- Quiesced = 6
“Status/Err service message received.”
LOG_FILE: /var/log/gr.console
SOURCE_FILE: rx/tbsi_svc.c
SCOPE: CARD
CONTEXT: RUNNING
SEVERITY: INFO
DESCRIPTION: This message is logged every time a Read Status service mesages is
received. Historically, this type of messages was used to aid debugging between the switch
manager and the card.
“Svc Msg rxed, svc_cmd=0x%x %s, node_cmd: 0x%x %s.”
LOG_FILE: /var/log/gr.console
SOURCE_FILE: rx/tbsi_svc.c
SCOPE: CARD
CONTEXT: RUNNING
SEVERITY: INFO
DESCRIPTION: This message is logged every time a service mesages is received.
Historically, this type of message was used to trace bugs in the protocols between the
switch manager and the card.
“Switch received with errors. Descriptor: 0x%8x.”
LOG_FILE /var/log/gr.console
SOURCE_FILE: tx/switch.c
SCOPE: CARD
CONTEXT: RUNNING
SEVERITY: INFO
DESCRIPTION: This message is logged when the TX CPU receives a descriptor with
error(s). This type of messages is used to aid debugging of the SDC and/or SP Switch
Router Adapter cards. The first 16 words of the header are also logged to provide
additional information.
“Switch route entry not found, node = %d.”
LOG_FILE: /var/log/gr.console
SOURCE_FILE: tx/tbsi_svc.c
SCOPE: CARD
CONTEXT: RUNNING
SEVERITY: WARNING
DESCRIPTION: This message is logged when the SP Switch Router Adapter card fails to
find a switch route entry for a node. This indicates that there is an error in building the
switch route table or in the downloading function.