Filter
Top Products
DEFINITY® Enterprise Communications Server Release 7
Console Operations Quick Reference
555-230-890
Issue 3
June 1999
Console Operations
10Basic Operation
■ Attendant Tone — If Attendant Tone is off, you will not hear busy tones,
dial tones, or ringback tones for internal calls.
■ Auto Answer — If Auto Answer is on, incoming calls are answered
automatically, which means that you do not have to press a call appearance
button. This feature can be used only when you are using a headset.
■ Display Languages — The display can show messages in four different
languages: U.S. English, French, Italian, and Spanish. This is an
administrable option.
Activate the Console
To use the attendant console, you first must activate the console by performing the
following:
1. Plug in the handset or the headset on either side of the console.
2. If the Night lamp is on, press the
NIGHT button.
■ The Night lamp goes off.
■ The Position Available lamp goes on.
Deactivate the Console
If you do not want anyone using the attendant console after hours, perform the
following to deactivate the attendant console:
1. If the Night lamp is off, press the
NIGHT button.
2. Unplug the handset or the headset.
■ All lamps on the console go off.
Answer Calls
To answer calls, perform the following:
1. A call comes in to the console:
■ You hear a 1-burst repetitive ring.
■ The caller’s name (if available) and extension displays. If this is a
call from outside, incoming trunk information displays.
■ The Position Available lamp goes off.
■ A call appearance lamp flashes.
2. Press the call appearance button where the lamp is flashing.
■ The ringing stops.
230890_3.bk Page 10 Tuesday, April 20, 1999 12:57 PM