Filter
Top Products
DEFINITY® Enterprise Communications Server Release 7
Console Operations Quick Reference
555-230-890
Issue 3
June 1999
Console Operations
23Feature Operation
Call Park
The Call Park feature allows you to put a call on hold and then retrieve the call
from any other telephone within the system. Calls can be parked using the
attendant console or any telephone that does not have a “client room” COS.
To use Call Park from the attendant console, perform the following:
1. While on an active call, press the
START button.
■ You hear a dial tone.
■ The Split lamp goes on.
2. Dial the Call Park feature access code _____, or press the
CALL PARK button.
■ You hear a dial tone.
3. Dial one of the administered Call Park extensions. These extensions are
designated for parking calls only.
■ You hear a confirmation tone.
4. Press the
RELEASE button.
To pick up a parked call, perform the following:
1. Dial the Answer Back feature access code _____ at the attendant console or
from any telephone or telephone that does not have the “client room” COS.
■ You hear a dial tone.
2. Dial the extension number where the call was parked.
■ You are connected to the parked call.
Conference
The Conference feature allows you to set up a conference call for up to 6 parties.
To use the Attendant Conference feature, perform the following:
1. While on an active call, press the
START button.
■ You hear a dial tone.
■ The Split lamp goes on.
2. Call the person you want to add to the conference.
■ You hear a ringback tone.
230890_3.bk Page 23 Tuesday, April 20, 1999 12:57 PM