Lucent Technologies M770 Switch User Manual


 
Cajun M770 Manager User’s Guide 7
Chapter 2
Agent Configuration
Before your network or Cajun M770 will work properly, your network agents must
be properly configured. This chapter helps you properly setup and configure your
agents, and includes helpful configuration notes for the different agent types. The
following sections are included:
General Agent Installation and Configuration
- General information on
agent configuration.
Designating Managers
- Assigning management stations for managing the
Cajun M770 Device.
General Agent Installation and Configuration
The following topics describe how to set up and configure all Lucent Technologies
agents.
Verifying Agent Installation
Before configuring your agents, make sure that each has been properly installed.
Check that the agent has been properly connected to the device, and the IP address
and community name for the agent have been set as described in the agent's
Installation Guide.
Downloading New Agent Software
Downloading agent software is done using Cajun UpdateMaster. For instructions,
please refer to the on-line help for Cajun UpdateMaster, or the
Cajun UpdateMaster
User’s Guide
.
Viewing the Agent Information Window
Every Lucent Technologies agent has an Agent Information window which
provides you with details about the agent. To view the configuration of an agent:
1Click .
OR
Open the
Configuration
menu and select
Element ! Agent
. The Agent
Information window appears.