Lumens Technology DC260 Laser Pointer User Manual


 
English - 32
4. Press [f] or [e] to turn to the previous/next video.
5. Press [Source] to exit.
[Note] Only the MOV files recorded can be played and live sound
output is not available; additional amplifier can be connected to
the PHONE port.
7.13 I would like to switch the view between the upper and
lower half of the image (Half Page)
1. Press [Half Page] on the remote control or control panel and the
upper half of the live image will be displayed.
2. When you press [Half Page] again, the lower half of the live image will
be displayed.
3. Press [Half Page] again to exit this function and return to the live image.
<Notes> This function is not available under Microscope Mode. The
Zoom in / out function is not available when this function is activated.
7.14 I would like to play the slides (Slide Show)
7.14.1 Setting the slide show effect
1. Press [Menu] on the remote control or control panel to enter
the setting menu.
2. Press [f] or [e] to access the [Storage] menu.
3. Press [d] to find the [Slide Show Effect].
4. Press [f] or [e] to select image switch mode between [Off /
Shutter / Right / Down / Side / Open].
5. Press [Menu] to exit.
7.14.2 Setting delay time
1. Press [Menu] on the remote control or control panel to enter
the setting menu.
2. Press [f] or [e] to access the [Storage] menu.
3. Press [d] to find the [Delay].
4. Press [f] or [e] to select image switch mode between [1 Sec / 3
Sec / 5 Sec / 10 Sec / Manual].
5. Press [Menu] to exit.