Filter
Top Products
Control panel:
1. Press [Menu] to enter the setting menu.
2. Press [f] or [e] to access the [Display] menu.
3. Press [d]to find[PBP]
4. Press [Enter] to enter the PBP (Picture by Picture) photo selection
screen.
5. Press [c] or [d] or [f] or [e] to select the files to be compared.
6. Press [Enter] to activate the image comparison.
7. Press [f] or [e] to move the images (captured images only)
leftward/rightward.
8. Press [Menu] again to return to image thumbnails.
9. Press [Source] to exit.
7.16 I would like to resume the factory default setting
(Factory Reset)
1. Press[Menu]on the remote control or control panel to enter the
setting menu
2. Press [f] or [e] to access the [Advance] menu.
3. Press [d] to select [Factory Reset].
4. Press [f] or [e] to select [Yes].
5. Press [Enter] to activate.
7.17 I would like to reduce the image noise (Noise
Reduction)
This function enables visual presenter to automatically clear image noise.
The noise is especially obvious when Visual presenter is connected to a
DLP projector. You can use this function to improve the image quality.
English - 34