Lumens Technology DC260 Laser Pointer User Manual


 
English - 4
Chapter 1 Precautions
Always follow these safety instructions when setting up and using the visual presenter:
1. Do not place visual presenter in tilted position.
2. Do not place the visual presenter on an unstable trolley, stand or table.
3.
Do not use the visual presenter near water or source of heat.
4.
Use attachments only as recommended.
5. Use the type of power source indicated on the visual presenter. If you are not sure of
the type of power available, consult your dealer or local electricity company for
advice
6. Place the visual presenter on a place that it can be unplugged easily.
7.
Always take the following precautions when handling the plug. Failure to do so may
result in sparks or fire.
Ensure the plug is free of dust before inserting it into a socket.
Ensure that the plug is inserted into the socket securely.
8.
Do not overload wall sockets, extensions leads or multi-way plug boards as this may
cause fire or electric shock.
9.
Do not place the visual presenter where the cord can be stepped on as this may
result in fraying or damage to the lead or the plug.
10.
Unplug the projector from the wall socket before cleaning. Use a damp cloth for
cleaning. Do not use liquid or aerosol cleaners.
11.
Do not block the slots and openings in the projector case. They provide ventilation
and prevent the visual presenter from overheating. Do not place the visual presenter
on a sofa, rug or other soft surface or in a built-in installation unless proper ventilation
is provided.
12.
Never push objects of any kind through cabinet slots. Never allow liquid of any kind
to spill into the visual presenter.
13.
Except as specifically instructed in this User Manual, do not attempt to operate this
product by yourself. Opening or removing covers may expose you to dangerous
voltages and other hazards. Refer all servicing to licensed service personnel.
14.
Unplug the visual presenter during thunderstorms or if it is not going to be used for
an extended period, do not place the visual presenter or remote control on top of
heat-emitting equipment or heated objects such as a car and etc.