Filter
Top Products
MAGMA
34
8. After 5-6 seconds the LED will stop flashing and turn off
completely.
Remove the card and replace it with a new one, then press the
button again.
Remove and
replace the
respective
PCIe card
Ideally the PCIe card that was removed from the system will be
replaced with an identical, working card. Replacing that card with
one that has a different function or purpose may cause the system
to crash due to a mismatch in the resources pre-allocated by the
operating system.
9. The LED should start flashing again.
If power should not be applied to this slot, immediately
press the button again and the LED will stop flashing and
remain off, otherwise go to step 11.
10. After 5-6 seconds the LED will stop flashing and remain on.
After a brief period the new device will be recognized by
the system, and it should be added to the list in the
“Safely Remove Hardware” dialog