Filter
Top Products
7
ENGLISH
Connecting to Video Equipment
(such as a Laser Disc player, a DVD player, a DSS,or a Video Camera)
+-
SPEAKER
TERMINAL
L/MONO
R
AUDIO IN
VIDEO2
COMPONENT IN
P
R
/C
R
P
B
/C
B
Y VIDEO S
VIDEO1
COMPOSITE IN
(8‰8W)
R
-+
L
Nearer Terminal
Further terminal
Use if the video
equipment has an
S video input terminal
To S video
output
terminals
To S video input
terminals
To audio/video
output terminals
To audio output
terminals
To component
output terminals
To audio/
video input
terminals
To component
input terminals
To audio input
terminals
Video equipment
(such as a Laser Disc player,
a DVD player, a DSS,or a Video Camera)
Monitor rear panel
Power
cable
Power cable
connector
Red
(R)
White
(W)
Red
(R)
White
(W)
Red(R)
Red(R)
White(W)
White(W)
Yellow(V)
Yellow
(V)
● Read SAFTEY GUIDELINES ( to ) carefully to ensure maximum safety before
proceeding to these steps:
1) Choose an appropriate site and install the product on a level table where the stand is secure.
■ Install the monitor to have ready access to a power socket available.
2) Make sure that the video equipment’s power switch is off.
3) Interconnect the signal input terminal on the monitor rear panel and the video equipment’s
signal output terminal to each other using an optional cable.
4) Insert one end of the power cable included into the rear-panel power cable connector and the
other end into a power socket.
5) Turn on the monitor, then the video equipment’s to make sure that a display image appears
on the monitor screen.
■ For instructions on turning on the monitor and adjusting its display images, see “Operating
Instructions” ( to ).
■ If video equipment with an S video output terminal is used, cabling by the S video cable
is recommended to provide finer video quality. (If an S video input terminal and a video
input terminal connect to the monitor at the same time, S video input would govern.)
9 17