Filter
Top Products
18
ENGLISH
OTHER FEATURES
Automatic Store
● Approximately 1 sec. after adjustment is completed, the adjustments will be recorded as shown
in the table below.
■ The previously recorded items will be lost.
■ The signal mode can be identified by the horizontal/vertical sync frequency and the sync signal
polarity. Different signals with which all the elements are the same or similar will be handled as the
same signal.
■ Contents that can be recorded are supplied for each signal mode for RGB 1 and RGB 2 input, and for
VIDEO 1 or VIDEO 2 input. Because of this, adjustment may not be appropriate when contents
recorded with RGB 1 (or RGB 2) is received with RGB 2 (or RGB 1), and when contents recorded
with VIDEO 1 (or VIDEO 2) is received with VIDEO 2 (or VIDEO 1) in the same signal mode.
Item Registration condition
Reproduction condition
Sound volume
Sound balance
Treble
Bass
Mute volume
Input status automatic display
Enlargement
Line correction
Three-dimensional Y/C separation
HD signal
Language selection
One set can be recorded.
During normal signal
reception.
Brightness
Cntrast
Color temperature
Gamma correction
Input signal level
One set can be recorded
during common RGB1, RGB2
input; one set of two can be
recorded during normal signal
reception with common
VIDEO 1, VIDEO 2 input.
During normal signal
reception.
Display area
Display size
Horizonal position
Vertical position
Dot clock frequency
Dot clock phase
Verical size
One group can be recorded
for each signal mode.
During recording and
when the same signal
mode is detected.
Display
VOLUME
BALANCE
TREBLE
BASS
MUTE LEVEL
AUTO FREQ.
INTERPOLATION
LINE INTP.
3D COMB
COMPONENT
LANGUAGE
BRIGHTINES
CONTRAST
COLOR SELECT
GAMMA
VIDEO LEVEL
DISPLAY AREA
DISPLAY SIZE
H.POSITION
V.POSITION
CLOCK
PHASE
V. SIZE
Color
Tint
Sharpness
One set can be recorded
during common VIDEO 1,
VIDEO 2 input.
During normal signal
reception.
COLOR
TINT
SHARPNESS