Filter
Top Products
10
ENGLISH
OPERATING INSTRUCTIONS
(continued)
■ The adjustment status will be displayed as guidance
while you press these buttons.
● While the guidance is on display, press ▲ to turn up
the volume.
● While the guidance is on display, press ▼ to turn
down the volume.
■ You can also adjust the sound volume setting via the
on-screen display system.
■ The sound volume adjustment mode will exit when no
keys are entered for 5 seconds. (The adjustment
status guidance will disappear automatically.)
Volume Adjustment
● While the on-screen display system is not on display, press the remote controller VOLUME
button (VOL)
▲ or ▼ (or the main unit VOLUME button ▲ or ▼) to adjust the sound
volume.
VOLUME : 30
M ain unit
VOLUME
Remote
controller
VOL
Input Selection
● Turn the remote controller jog dial to choose an input signal (VIDEO1, VIDEO2, RGB1, or
RGB2) and press the ENT button. Turn the remote controller jog dial to choose INPUT and
press the ENT button, or press the main unit RGB/VIDEO button to switch through VIDEO1,
VIDEO2, RGB1, and RGB2 in this order.
RGB1 (D-sub input)
RGB2 (BNC input)
VIDEO1 (
composite or S input
)
VIDEO2 (
COMPONENT input
)
Remote
controller
RGB/VIDEO
Main unit
ENT ENT
TV
1
VID- I
■ When the same signal is input to RGB1 and
RGB2, the phase may in some cases shift
slightly but this is not a malfunction. In such
case, readjust the PHASE of the one being
used.
12
Sound volume setting
Adjustment status guidance
Press the TV button to display "TV" in the LCD. The remote controller is functional only when "TV" is
displayed in the LCD. If "TV" is not displayed in the LCD, press the TV button.