Marantz PD4298HD s Computer Monitor User Manual


 
vii
ENGLISH
How to clean the monitor.
Before cleaning the monitor, turn off the monitor and disconnect the power plug from
the mains.
When cleaning the monitor, do not spray directly the screen or cabinet with cleaner.
Use a clean, dust free, dry and soft cloth. If it is not enough, then use a cloth with non-
alcoholic or non-ammoniac detergent.
Do not rub the surface of the screen with ball-point-pen or screw-driver etc.
Precautions for the monitor
- Use the attached signal-cable when you connect the monitor with PC equipment.
Do not use other signal-cables.
- Confirm the connector is fixed tightly when the signal cable is connected.
Also confirm the screws on the connector are tightened.
- Plug the power cord of the monitor into a different socket from that for other
equipment, such as Radio etc..
- Use a plug with ground terminal and make sure that it connects to the ground.
Precautions for Radio
- Keep the monitor away from Radio.
- Adjust Radio antennas in order for the monitor not to receive interference.
- The antenna cable of Radio should be kept away from the monitor.
- Use a coaxial cable for antenna.
You can check if this monitor influences Radio receivers by turning off all other
equipment other than the monitor.
If you can find a problem receiving Radio when using the monitor, check the
instructions mentioned above.
Precaution during transportation
Please pay attention when you transport this monitor because it is heavy.
Furthermore, use the specific carton box and its packaging materials when the monitor is
transported.