Filter
Top Products
Quick Start
17
Select the “Video” using the INPUT buttons on the projector or the VIDEO button on the remote
control.
5. Select the INPUT mode
• When pressing the INPUT buttons on the projector, input mode switches in the following
order:
Comp. 1 Comp. 2 S-Video Video RGB HDMI
• Pressing the INPUT buttons on the remote control also allows you to switch the input mode.
On the
projector
On the remote
control
On-screen display
\P. 29
Video
7.
Correct trapezoidal distortion (GEOMETRIC ADJUSTMENT)
\PP. 32–35
4. Turn the video equipment on and start playback
8. Turn the Power off
Press the / I STANDBY/ON button on the projector or the STANDBY button on the remote
control to put the projector into standby mode.
• Unplug the power cord from the AC outlet after the cooling fan stops.
On-screen Display
On the
projector
On the remote
control
\P. 29
STANDBY
6. Adjust the focus, image size, and projector angle
\PP. 30, 31
1. Adjust the focus by
turning the focus ring.
AS
P
ECT
ENTER
I
N
PU
T
MEN
U
INPUT
ST
A
N
D
BY
/ON
L
AM
P
T
E
M
P.
ASP
ECT
EN
TER
IN
PU
T
ME
NU
IN
PU
T
S
T
A
N
D
BY
/
ON
LA
M
P
T
E
M
P
.
A
S
P
E
CT
ENT
ER
I
NPU
T
M
E
N
U
I
NPU
T
S
T
A
N
D
B
Y
/
O
N
L
A
M
P
T
E
M
P
.
2. Adjust the projection
image size by turning
the zoom ring.
3. Adjust the projector
angle using the HEIGHT
ADJUST lever.
Zoom ring
Focus ring
1. Press c KEYSTONE on the remote control.
2. Press P/R/O/Q on the remote control to set the upper-left position of the projected image.
3. Press i ENTER on the remote control to set the position.
4. Follow steps 2 and 3 to also set the upper-right, lower-right, and lower-left positions of the
projected image.
• When you confirm the lower left position, the screen adjustments will be set and setup will
end.
V
VIDEO
INPUT
INPUT
06.7.19, 4:24 PMPage 17