Filter
Top Products
50
Using the “Options” Menu (Continued)
22
22
2
Selecting the Transmission
Speed (RS-232C)
Make sure that both the projector and computer
are set for the same baud rate.
Selectable
items
9600bps
115200bps
Description
Transmission speed is slow.
Transmission speed is rapid.
P
R
44
44
4 Fan Mode Setting
This function changes the fan rotation speed.
Selectable
items
Normal
High
Description
Suitable for normal environments.
Select this when using the projector at
altitudes of approximately 4,900 feet
(1,500 meters) or more.
When “Fan Mode” is set to “High”, the fan rotation
speeds up, and the fan noise becomes louder.
33
33
3
Reducing the Power
Consumption When the
Power Is in Standby Mode
When “STANDBY Mode” has been set to “Stan-
dard”, the RS-232C function is activated and
power is consumed even in standby mode. It is
recommended that “STANDBY Mode” be set to
“Eco” when it is not being used. This reduces
power consumption when the projector is in
standby mode.
Selectable items
Standard
Eco
Description
The RS-232C function is
activated even if the projector is
in standby mode.
The RS-232C function is
switched off when the projector
is in standby mode.
• When you want to control the projector using
the RS-232C function, set to “Standard”.
Note
55
55
5
Returning to the Default
Settings
Use “All Reset” to initialize all the adjustments
you have made to the default settings.
The following items cannot be initialized.
•“Fine Sync” menu
– Special Modes
•“Options1” menu
– Lamp Timer (Life)
– Language
Note
Menu operation = Page 41
The projector can switch the on-screen display
language among 11 languages.
66
66
6
Selecting the On-screen
Display Language
English
Deutsch
Español
Nederlands
Français
Italiano
Svenska
Português
06.7.19, 4:28 PMPage 50