Marantz VP4001 Projector User Manual


 
48
Menu operation = Page 41
66
66
6 Signal Type Setting
Using the “Options” Menu (Continued)
This function allows you to select the input sig-
nal type (RGB or Component) for RGB or HDMI.
Selectable items
Auto
RGB
Component
Description
Automatically selects the
appropriate input signal
between RGB and Component.
Set when RGB signals are
received.
Set when component signals
are received.
55
55
5
Setting the Video
System
This function can only be set in S-Video or
Video.
The video input system mode is factory preset
to “Auto”;however, a clear picture from the con-
nected audio-visual equipment may not be re-
ceived, depending on the video signal difference.
In that case, switch the video signal.
Selectable items
PAL
SECAM
NTSC4.43
NTSC3.58
Description
When connected to PAL video
equipment.
When connected to SECAM
video equipment.
When reproducing NTSC
signals in PAL video equipment.
When connected to NTSC video
equipment.
44
44
4
Setting On-screen Display
Selectable
items
On
Off
Description
All On-screen Displays are displayed.
INPUT/FREEZE/AUTO SYNC/ASPECT/
PICTURE MODE/IRIS are not
displayed.
• You can also select “Signal Type” using
R/C
RGB/COMP. on the remote control (RGB or
HDMI).
Note
88
88
8
Selecting the Background
Image
Selectable items
Blue
None
Description
Blue screen
— (Black screen)
77
77
7
Selecting the HDMI Setting
When there is an HDMI-capable device con-
nected to HDMI, an optimum picture may not be
displayed if the device’s output signal type and
the projector’s input signal type do not match. If
this should occur, switch the HDMI Setting.
Selectable items
Normal
Expand
Description
When the black levels of the
image show banding or appear
faded, select the option that
results in the best picture
quality. (In most circumstances,
“Normal” should be selected.)
• The HDMI Setting can be selected only when
HDMI is selected.
Note
06.7.19, 4:28 PMPage 48