Filter
Top Products
LTRx-512 Installation and User’s Guide
15
3E - Test Bell Circuits
Manual Bell Control
Use Manual Bell Control Function [3] (described on Pg. 20 to test selected bell circuits. Press [#][3][#]
to start this function
Auto Test the Bells
Use the Auto Bell Test feature to turn on all bell relays once per minute at the start of each minute.
Once you start this function, you can test the continuity of your bell wiring circuits. Use the “hidden
code” 2355878 [BELLTST] to start the Auto Bell Test. When you enter this code, ignore anything that
displays on the screen
Use Function [6] to disable any relays that you do not want to use in your testing
Once you finish testing, make sure you enter the hidden code again to stop the Auto Bell Test and use
Function [6] to enable any relays that you earlier disabled
3F – Set Daylight Savings
Your Master comes set to adjust for Daylight Savings Time in the United States. If you live outside the
United States or if your region does not observe daylight savings, use Function [7]
(Described on Pg. 26); otherwise, skip to Step 3g.
MANUAL BELL CONTROLS
1-2-3-4-5-6-7-8
PRESS AND HOLD [#]
TO EXECUTE. [*]TO END